Ink Metering
Enclosed liquid delivery systems on modern flexographic presses use dual-blade assemblies to control the volume of ink transferred to the anilox roll. The doctor blade chamber holds a pressurized reservoir of ink directly against the rotating ceramic roll, with a trailing blade sealing the bottom and a leading blade doctoring the top. This configuration prevents solvent evaporation and keeps the ink free from contaminants like dust or paper fibres.
It ensures a consistent, uniform film of ink is presented to the printing plate regardless of press speed. The design also reduces ink waste during job changeovers by allowing rapid flushing.
Coating Control
Maintaining a stable ink viscosity is essential for high-fidelity packaging print runs. Within the doctor blade chamber, the liquid is constantly circulated to prevent temperature spikes and pigment settling. The pressurized fluid dynamics within the housing help to expel micro-bubbles that might otherwise create pinholes on the printed surface.
By sealing the ink away from the open air, the system maintains a stable solvent balance over long production runs. Flexographic printers rely on this stability to maintain consistent brand colours across thousands of sheets.
Mechanical Setup
Blade wear and chamber alignment require regular inspection to avoid print defects. If the chamber sits at an incorrect angle, the doctoring action becomes uneven. Operators must replace worn carbon-steel or plastic blades to prevent leakage.
Proper blade pressure extends roll life.