Crush Resistance
Corrugated packaging depends heavily on the performance specified by ISO 3035 for evaluating flat crush resistance in single faced and single wall corrugated board. Converters use this standardized compression test to determine how well fluting mediums withstand vertical loads during stacking and transport. Paper mills rely on the resulting kilopascal values to adjust refining parameters and optimize wet end chemistry on the paper machine.
When linerboards and fluting combine into finished board, the collective structural integrity relies on the continuous geometry tested by this procedure.
Flute Geometry
Circular platens apply a continuously increasing force to a defined test piece until the flutes collapse completely. The resulting maximum force value divides by the tested area to yield a kiloNewton per square meter result. Sample preparation requires careful conditioning at controlled humidity levels because moisture severely degrades paper stiffness and distorts the compression reading.
Technicians mount the specimen vertically between rigid metal plates, ensuring the applied force remains perpendicular to the plane of the board.
Compression Tolerance
Variations in basis weight and adhesive application directly influence the final resistance metric recorded during laboratory evaluation. Converting plants monitor these figures continuously to verify that corrugating rolls maintain adequate profile depth without crushing the delicate paper structure prematurely. If ambient humidity shifts during transit, the recorded compressive strength drops proportionally even when physical dimensions remain entirely unchanged.
High speed converting lines demand consistent flat crush performance to prevent structural failure during subsequent die cutting and printing operations.