Material Geometry
Structural thickness dictates the internal deformation state of paperboard during bending or creasing. Plane strain constraint identifies the condition where a board sheet undergoes deformation in two dimensions because its width relative to thickness prevents lateral expansion. Engineers identify this state when the thickness of the material exceeds ten times the grain orientation measurement during a fold.
High levels of this restriction occur during heavy caliper boxboard conversion.
Conversion Mechanics
Resistance to lateral movement creates a shift in the stress distribution across the cross section of a fibrous substrate. A plane strain constraint forces the material to bear higher loads before fracture occurs along a crease line. Mills observe this shift when testing stiff folding boxboard as the internal fibers resist the Poisson effect.
Proper tooling depth accounts for this internal pressure to prevent cracking on the outer surface of a package.
Performance Limitation
Thin substrates fail to maintain this restricted state because they allow unrestricted lateral contraction. Plane strain constraint vanishes when the width of a specimen allows the material to yield freely in the third dimension. This transition from plane strain to plane stress happens as the thickness ratio drops below the threshold for specific wood fiber types.
Fracture mechanics remain stable under high constraint conditions but become unpredictable as the material thins.