Wood Extractives
Naturally occurring tricyclic diterpene carboxylic acids found in softwoods provide the raw material for rosin sizing and act as markers for wood pulp origin. These compounds, collectively known as resin acids, are extracted during the kraft pulping process and recovered as tall oil. They are widely used in the paper industry to impart water resistance to paper and paperboard products.
Analytical chemists monitor their levels to assess the effectiveness of the sizing treatment and to identify the botanical source of the pulp. The chemical structure of these acids consists of a hydrophobic diterpene skeleton and a hydrophilic carboxyl group. This dual nature allows them to orient themselves at the fiber-water interface, reducing the surface energy of the paper sheet and preventing water from penetrating.
They are classified into two main groups, namely the abietane type and the pimarane type, based on their molecular structure.
Sizing Mechanics
Rosin sizing involves adding the sodium or potassium salts of these compounds to the pulp slurry along with papermaker’s alum. The aluminum ions react with the resin acids to form a positively charged complex that binds to the negatively charged cellulose fibers. This interaction results in a highly distributed hydrophobic film upon drying, which prevents the feathering of inks during printing.
Sizing efficiency depends heavily on the ratio of aluminum to acid.
Effluent Impact
Biological treatment of pulp mill wastewater is essential because these natural acids are toxic to aquatic organisms at low concentrations. Aerobic treatment systems in modern mills utilize microorganisms to break down the diterpene structures and minimize the discharge of resin acids into the surrounding environment. Regular testing ensures that the concentration of resin acids in the final effluent is well within regional regulatory limits, protecting the surrounding aquatic environment from chronic toxicity.