Side Reaction
Chemical secondary processes occurring during the curing of isocyanate-based coatings can alter the mechanical properties of the finished film. In polyurethane systems, secondary urea formation occurs when unreacted isocyanate groups react with moisture rather than the intended polyol resin. This path creates biuret linkages that increase the hardness of the polymer.
Moisture Interaction
Exposure to atmospheric water vapor before the coating has fully cured triggers this alternative chemical pathway. When moisture enters the coating, it reacts with the isocyanate groups to form unstable carbamic acids, which quickly decompose into carbon dioxide and primary amines. These newly formed amines then react rapidly with remaining isocyanate groups to yield urea structures.
High humidity levels in the converting plant accelerate this reaction, making climate control in the application area a major factor in coating consistency. The rate of water diffusion into the wet film is also influenced by the thickness of the applied layer, with thicker coatings being more susceptible to surface-only curing and skin formation.
Physical Consequence
Changes in the chemical structure of the cured coating affect both the flexibility and the appearance of the packaged board. The accumulation of urea groups increases the brittleness of the film, which can lead to cracking along the fold lines of cartons. In addition, the release of carbon dioxide gas during the reaction can cause micro-bubbles and surface haze.
Monitoring the ambient humidity and coating chemistry prevents these defects, ensuring that the finished product maintains its barrier performance.