Quality Flaw
An unwanted physical ink transfer defect occurs when un-cured ink on printed sheets marks the reverse side of overlying sheets inside delivery stacks. High speed printing operations encounter set-off defect conditions when ink setting rates lag behind sheet deposition speeds on offset equipment. Mechanical contact under pile weight squeezes wet ink onto adjacent substrates.
Transfer Mechanism
Mechanical pressure inside delivery piles forces wet ink films into contact with raw paper surfaces above. Occurrence of a set-off defect depends on the balance between ink setting speed and mechanical pile pressure. Rapid absorption of low-viscosity ink oils into coated paper capillary networks hardens the ink surface before contact occurs.
Slow absorption allows fluid ink resin to adhere to the underside of the next sheet in the stack.
Pressure Threshold
Stack height and sheet substrate weight determine static compressive loads applied to freshly printed ink films. Controlling set-off defect rates requires anti-set-off powders or infrared drying lamps to accelerate ink phase changes before stacking. Starch spray particles create physical separation gaps between stacked sheets, preventing ink contact during pallet accumulation.
Excessively heavy powder application damages surface smoothness and creates feel problems on finished folding cartons. Substrates with low capillary pore volume require reduced delivery stack heights to prevent ink transfer without excessive powder usage.