Fiber Orientation
The somerville shive test determines the concentration of non-fibrous contaminants within a wood pulp slurry through physical separation. This process relies on a calibrated slotted screen to isolate rigid particles from the desired cellulose matrix. Analysts define these contaminants by their physical dimensions rather than chemical composition, as the screen catches any fragment that exceeds the fixed slot width.
Operators quantify the retained material to judge the quality of the bleached or unbleached pulp intended for paper production.
Process Requirement
Mechanical pulping methods naturally generate these shives when incomplete refining leaves wood bundles intact. The Somerville shive apparatus forces the pulp suspension through plates featuring slots precisely machined to five hundredths of a millimeter. Water flow carries the acceptable fibers through the apertures while the rigid bundles remain trapped above the screen surface.
Technicians collect and dry the residual material to calculate a mass percentage relative to the original oven-dry pulp weight. High levels of these particles degrade the sheet surface by creating visual defects or paper breaks during high-speed converting.
Production Boundary
Standardization of this test ensures that consistent pulp grades reach the paper machine without excessive contaminants. Deviations in shive counts indicate that the upstream refiner requires adjustment to better separate wood bundles into individual fibers. Control remains limited by the screen slot width because particles smaller than the specified dimension pass into the final paper stock regardless of their shape.
This method functions as a fundamental metric for evaluating the efficiency of pulping systems and the cleanliness of incoming raw material stocks.