Thermal Contraction
Dimensional reduction in polymer films or synthetic paper occurs when exposure to elevated temperatures releases the internal stresses frozen into the material during extrusion. This thermal shrinkage can cause the substrate to warp or curl if the temperature during printing or lamination is not carefully controlled. The property is measured as a percentage change in length and width.
Material Behavior
Oriented polypropylene and polyester films are highly sensitive to the heat applied during the drying of solvent based inks or the activation of thermal adhesives. Uncontrolled thermal shrinkage during these processes leads to web tension issues, which can cause the material to wrinkle or tracking errors to occur in the press. Testing involves heating a sample of the film in an oven at a specific temperature for a set duration and measuring the resulting contraction.
If the shrinkage is too high, the material is unsuitable for high temperature application lines or pouch making.
Converting Impact
Preventing distortion in flexible packaging laminates requires using films with matched contraction rates. When two materials with different thermal shrinkage levels are bonded together, the laminate will curl toward the side that contracts more as it cools. This curling makes the laminate difficult to run on automatic form fill seal machines, which decreases packaging line efficiency.