Substrate Modifier
Electrical discharge equipment mounted directly on a printing press or laminating line increases the surface energy of plastic films immediately before processing. The inline corona treater utilizes high-voltage electrodes to ionize the air in the gap between the electrode and a grounded roller, generating a continuous plasma field. By ionizing the air, the electrical discharge breaks polymer chains on the film surface, creating polar sites that receive inks and adhesives.
Operational Control
Adjusting the generator output and the line speed controls the electrical energy dose applied per unit area. When the inline corona treater operates at the correct power level, it matches the treatment intensity to the specific polymer grade, preventing either insufficient wetting or thermal damage to the web. If the line speed increases without a corresponding raise in power, the surface treatment falls below the threshold required for ink adhesion.
Excessive discharge must be avoided, as it can cause pinholes in thin films or create blocking issues on the rewound roll.
Processing Benefit
Inline positioning eliminates the risk of surface energy decay that occurs when pre-treated rolls are stored for long periods. The fresh treatment ensures maximum chemical reactivity of the polar groups at the moment of ink application. This immediate processing secures the highest possible bond strength.