Surface Retention
Measurement of the minimum angle formed by a liquid boundary as it is withdrawn from a pre-wetted surface defines the retention and shedding characteristics of coatings and inks on paperboard. This value is known as the receding contact angle, representing the lower limit of the dynamic wetting range. It reveals how well a solid surface holds onto a liquid film after the initial wetting has taken place.
High values indicate that the liquid retracts easily without leaving a film, which is essential for liquid-shedding barrier papers.
Dewetting Limit
Syringe suction during testing slowly pulls fluid back into the needle while cameras record the retreating meniscus. The resulting receding contact angle determines the hysteresis when compared with the advancing angle. Low values show that the liquid adheres strongly and resists dewetting, leaving a continuous wet film behind.
This property is exploited in gloss coatings where a uniform and continuous wet layer is required for smooth finish results.
Print Quality
Flexographic printing inks must remain spread across the plate and substrate without retracting into droplets before drying. Inadequate receding contact angle behavior leads to reticulation, a print defect where the wet ink coalesces and exposes unprinted spots on the board. Monitoring this value on the press room floor helps operators adjust the ink surface tension to match the board substrate.