Standard Method
Standardized testing protocol established by the Scandinavian Pulp, Paper and Board Testing Committee determines dry matter content in wet pulp suspensions and slush stock samples. Quality control laboratories execute SCAN-M3 procedures to verify fiber concentration during stock preparation and commercial pulp sales accounting. The method specifies gravimetric measurement of wet pulp mass before and after thermal oven drying to constant weight at one hundred and five degrees Celsius.
Results express dry substance as a mass percentage of the initial moist sample mass.
Dryness Determination
Precision sample collection ensures representative sampling from slush pulp pipelines or storage chests prior to gravimetric analysis. The technician weighs the moist pulp sample on an analytical balance, records initial mass, and transfers the material to a ventilated drying oven. Thermal evaporation removes free and bound water until consecutive mass determinations reveal no further change.
Calculating the ratio of dry residue mass to initial wet mass yields dry matter percentage under standard atmospheric conditions. The test eliminates moisture errors in pulp yield calculations and ensures accurate chemical dosing during bleaching or refining stages.
Scope Limit
Volatile organic compounds present in unbleached pulps or recycled stocks evaporate during oven drying, causing minor overestimation of moisture loss. The SCAN-M3 test protocol applies exclusively to wet pulp slurries and does not replace baled pulp moisture standards governed by international ISO procedures.