Wettability Index
Quantitative evaluation of liquid surface tension determines the critical surface energy required for liquid wetting on polymer films and coated board. Measuring surface dyne level using calibrated wetting inks indicates whether a substrate will accept solvent inks or aqueous adhesives. Values are expressed in dynes per centimeter or millinewtons per meter.
Complete wetting occurs when film surface energy exceeds liquid ink surface tension.
Surface Energy
Non-polar polymers such as polyolefins inherently possess low surface energy, causing aqueous inks and adhesives to bead up rather than form continuous films. Corona or flame treatment oxidizes the surface layer, introducing polar functional groups like hydroxyl and carboxyl species that elevate polar energy components. Applying calibrated dyne fluids of known surface tension reveals the wetting threshold when liquid spreads within two seconds without retracting into beads.
Printing inks require surface energy at least ten dynes per centimeter higher than ink fluid tension to ensure adhesion and resist pin-holing. Continuous inline monitoring prevents converting failures caused by uneven corona treatment or additive migration. Hydrophobic slip additives in polyolefin films migrate to the surface over time, lowering energy levels during storage.
Decay Horizon
Post-treatment surface energy declines progressively over storage time due to mobile additive migration and molecular relaxation. Falling below thirty-eight dynes per centimeter causes solventless adhesive delamination on packaging converting lines.