Abrasion Measurement
Standardized mechanical abrasion testing measuring the rub resistance of printed paperboard substrates evaluates ink film durability under controlled load conditions. Quality control laboratories perform Sutherland rub testing by moving a weighted receptor block attached to a receptor cloth back and forth across a printed specimen. This test method quantifies ink transfer and surface degradation after a specified stroke count.
Results establish whether print coatings withstand shipping friction without aesthetic failure. The test procedure evaluates dry or wet rub resistance but excludes dynamic impact shock.
Test Execution
Motorized test fixtures sweep a weighted mass across printed surfaces at constant stroke speeds. Executing Sutherland rub testing requires selecting receptor blocks weighing either 908 grams or 1816 grams based on substrate specification. The instrument drives the receptor block in an arc motion across printed paperboard over 20 to 100 stroke cycles.
Unprinted receptor paper receives transferred ink, allowing visual or densitometric evaluation of ink rub-off. Testing under wet conditions involves applying distilled water or functional liquids to evaluate chemical resistance during rub sequences.
Coating Evaluation
Comparative densitometer readings on receptor sheets quantify color transfer severity across test cycles. Formulators use Sutherland rub testing to verify that overprint varnishes and aqueous coatings provide adequate rub protection for retail packaging. Insufficient varnish cure yields high optical density readings on receptor strips.