Sliding Resistance
Mechanical capacity of a bonded joint to resist forces acting parallel to the interface defines its performance under sliding stress. Evaluation of mode ii shear strength measures how well a laminate resists the tendency of its layers to slide over one another. This property is distinct from peeling because the force is applied in the plane of the bond.
Test Geometry
Assessment of this value typically uses an end notched flexure test to isolate the sliding motion at the crack tip. Higher mode ii shear strength ensures that a multi ply board does not delaminate when it is pushed through a tight radius on a packaging machine. The measurement quantifies the energy required to propagate a failure along the adhesive line when the substrates are under shear.
Converting Application
Fiber orientation and adhesive penetration depth are the main factors that dictate the measured resistance. In corrugated board, the mode ii shear strength determines if the fluting will stay attached to the liners during heavy crushing loads. If the adhesive is too brittle, it may snap under these sliding forces.
Tougher resins that can absorb energy without fracturing help the package maintain its integrity during rough handling.