Flotation Deinking Yield Shrinkage Calculation in Recycled Board Converting

Deinking yield shrinkage calculation requires ash-corrected mass balancing at 525°C to separate mineral filler purge from claimable fiber losses.

12.11.26 11 min

Reject

A compressed bundle of corrugated paperboard encased within a solid transparent resin block rests on a dark studio surface.

Mass Loss Dynamics in Mechanical Separation

Removing ink during stock preparation relies on hydrophobic ink particles attaching to rising air bubbles in the flotation cell. In recycled paperboard production, secondary fiber streams with printed newsprint, offset magazines, and flexographic packaging are pulped at high consistency under alkaline pH levels between 9.5 and 10.5. Sodium hydroxide, sodium silicate, and fatty acid surfactants saponify oil-based binders and disperse pigment clusters.

Successful flotation targets particles between 10 and 150 µm in diameter. Below 10 µm, particles stay suspended in the aqueous phase through Brownian motion; above 150 µm, kinetic shear from air bubbles overcomes attachment and detaches them by gravity.

Separation efficiency dictates yield loss across the primary, secondary, and tertiary deinking stages. Froth carries hydrophobic inks to the surface, but hydraulic entrainment inevitably pulls solid material into the skimmed reject. This rejected dry mass includes dispersed inks, stickies, organo-clay complexes, broken fiber fines, and inorganic coatings.

Fines and microfibrils have large specific surface areas that trap saponified fatty acid soaps, bringing usable cellulosic material into the froth alongside mineral pigments.

Standard deinking accepts a total dry mass shrinkage between 8% and 22% of incoming stock weight, a margin set largely by the raw furnish. High-grade woodfree office paper produces fewer rejects, while heavily coated folding boxboard loses significant inorganic mass. Rejects break down into ash components like calcium carbonate and kaolin clay, alongside usable organic fiber.

Mills tracking fiber retention evaluate ash-free dry weight to separate true cellulosic loss from routine filler purge.

Flotation deinking of mixed packaging grades generates a total dry solids mass loss between 12% and 18% under standard operating slurry consistencies of 1.0% to 1.5%.
A digital render of a corrugated cardboard manufacturing line shows a robotic arm positioned above a metal roller processing fluted paper.

Flotation Cell Hydraulic Performance

Air injection settings control both ink collection rates and volumetric reject flow. Multi-stage banks run primary cells to maximize ink removal and secondary cells to recover fiber from primary rejects. Injecting micro-bubbles through high-shear venturi nozzles expands the interfacial surface, boosting ink collection but also increasing hydraulic carryover of dissolved and colloidal solids.

Over-dosing surfactant drops bubble size below critical limits, generating a stable foam that cannot drain water before spilling over the discharge weir.

Managing cell overflow demands precise consistency control. Operators tuning stock preparation lines adjust reject weir height to preserve foam depth without stripping excess water. Dropping slurry consistency lowers mechanical fiber entanglement, allowing cleaner separation of fillers and inks from long fibers.

High hydraulic throughput cuts bubble residence time in the aeration zone, forcing larger reject volumes to reach brightness targets. The extra overflow increases sludge dewatering loads in effluent treatment, shifting material costs from stock prep to waste management.

Elevated mass loss during primary flotation reflects unoptimized incoming furnish composition rather than mechanical inefficiency inside the aeration manifold.

Balance

A handheld electronic testing device rests on corrugated board upon a metal workbench inside a material evaluation facility with stacked substrate samples.

Where Does Flotation Mass Disappear during Deinking?

Determining actual process shrinkage requires an exact mass balance based on dry solids and ash measurements. Simple wet mass figures carry large errors because moisture fluctuates in raw bales and dewatered sludge cakes. Process engineers use standardized test methods like INGEDE Method 11 or PTS-RH 021/97 to establish pulp yields during laboratory trials and mill audits.

These procedures rely on gravimetric analysis of oven-dry pulp before and after flotation, paired with ash ignition at 525 degrees Celsius to separate organic fiber loss from inorganic filler purge.

Total dry mass yield is the percentage of dry solids recovered in accepted stock relative to the total dry solids fed into the flotation cell. Evaluating yield without accounting for mineral ash gives a skewed picture of fiber retention. The ash-corrected yield isolates true cellulosic recovery by removing inorganic filler weights from both input and output values.

The equations for dry mass balance and ash-corrected fiber yield are:

Total Dry Mass Yield (%) = (M_accept / M_feed) 100

Ash-Corrected Fiber Yield (%) = / 100

Where M_feed is the oven-dry mass of pulp entering flotation, M_accept is the oven-dry mass of accepted pulp, A_feed is the percentage ash content of the feed stock at 525 degrees Celsius, and A_accept is the percentage ash content of the accepted stock at 525 degrees Celsius.

Flotation Cell Mass Balance Metrics Across Recycled Stock Components
Process Input / Output Stream Total Mass Flow (oven-dry t/h) Ash Content at 525°C (%) Organic Fiber Mass (t/h) Yield Fraction (%)
Pulp Feed to Flotation Cell 45.00 18.5 36.68 100.0
Accepted Deinked Stock 38.25 6.2 35.88 85.0
Flotation Cell Reject (Froth) 6.75 88.1 0.80 15.0

Consider a stock preparation trial with 100 oven-dry tonnes of printed boxboard furnish. Initial testing shows a feed ash content of 18.5%. After multi-stage flotation, the process yields 85.0 oven-dry tonnes of accepted pulp at 6.2% ash.

Total dry mass yield is 85.0%. Applying these figures to the ash-corrected fiber yield formula gives an organic fiber recovery of 97.8%. The remaining 15.0% mass loss comprises 12.3 tonnes of inorganic fillers and coatings, alongside 2.7 tonnes of lost fiber fines.

Accurate fiber yield calculations require subtracting the ignited mineral fraction at 525 degrees Celsius to prevent filler purge from appearing as cellulosic material loss.
Fibrous recycled material feeds directly into industrial converting equipment as a continuous sheet substrate is prepared for downstream packaging production and distribution.

Variance Analysis in Laboratory Yield Measurements

Discrepancies between bench-scale yield predictions and full-scale mill performance stem from differences in hydrodynamic shear, air distribution, and retention time. Laboratory flotation cells run batch trials for set durations, while commercial mills use continuous multi-cell cascades with internal recycle loops. Procedures like PTS-RH 021/97 measure stock recyclability via ink discharge and mass loss under fixed surfactant additions.

These bench metrics offer useful comparative baselines, but they systematically understate the fiber fine losses that occur in high-speed mill systems.

Sampling error is the main reason mass balances fail to close during mill audits. Reject flow rates fluctuate with foam density, so taking representative continuous samples requires automated mass-flow meters and nuclear density gauges. Moisture testing depends on strict oven-drying at 105 degrees Celsius until samples reach constant weight; insufficient drying leaves bound water in high-yield pulps, inflating accepted mass and hiding actual shrinkage.

Uncorrected filler purge artificially depresses calculated yield whenever inorganic mineral content is counted as usable packaging material.

Credit

Dense recycled fiber pulp forms a textured molded substrate featuring embedded dark fragments and fibrous particulate matter.

Mass Balance Reconciliation in Chain of Custody Audits

Chain-of-custody standards for recycled content claims mandate exact rules for reconciling process losses. Standards like FSC-STD-40-004 V3-1 and PEFC ST 2002:2020 require certified companies to use verified conversion factors when converting input volumes into output credits. In recycled board mills using flotation deinking, physical mass lost during ink and filler removal must be deducted before volume credits hit the certified ledger.

A conversion factor is the ratio of output weight to input weight for a given processing step. If a board mill buys 1,000 tonnes of post-consumer paper with an FSC Recycled 100% claim, it cannot credit the full 1,000 tonnes if deinking and washing reduce yield. Applying an audited conversion factor of 0.82 logs 820 tonnes of certified furnish into the production ledger.

Failing to account for yield shrinkage leads to over-crediting, which triggers non-conformities during annual audits and risks certificate suspension.

  1. Raw Material Input Quantification ~ Weigh incoming bales on arrival, adjust for moisture against standard trade baselines, and record certified claim statements from supplier invoices in the inventory ledger.
  2. Conversion Factor Determination ~ Conduct mass-balance audits in stock prep to establish conversion factors accounting for flotation reject, washing losses, and heavy contaminants.
  3. Credit Ledger Entry ~ Multiply total dry metric tonnes of certified input by the conversion factor to establish claimable output credits for finished reels.
  4. Outbound Document Allocation ~ Deduct credits from the certified ledger as finished reels ship, matching invoice lines against available balances.
Chain of Custody Conversion Factor Audit Requirements for Recycled Board Mills
Furnish Grade Deinking Process Stages Average Process Loss (%) Audited Conversion Factor Claim Credit Yield per 100t Input
Sorted Office Paper (SOP) Flotation + Washing + Bleaching 22.0 0.78 78.0 tonnes
Deinking Goods (Magazines/News) Single-Stage Flotation + Washing 15.0 0.85 85.0 tonnes
Mixed Recovered Packaging Flotation Deinking + Screening 12.0 0.88 88.0 tonnes
Unprinted Old Corrugated Containers Coarse + Fine Screening Only 4.0 0.96 96.0 tonnes

Converters purchasing certified board need to confirm that mill conversion factors reflect actual stock prep yields. Where specifications call for at least 85% post-consumer recycled content, the mill must show batch records demonstrating that shrinkage was factored in before calculating claim percentages. Omitting flotation losses artificially inflates post-consumer figures, leading to improper packaging claims that breach trade regulations and certification rules.

Under FSC-STD-40-004 Clause 6.1, certified organizations must update conversion factors whenever process changes alter yields by more than five percent.

Furnish

A digital analytical scale with a glass chamber rests on a dark surface alongside a stack of paper samples in this synthetic laboratory rendering.

Converter Yield Shrinkage and Landed Substrate Arithmetic

Converting recycled boxboard into folding cartons adds a second layer of material shrinkage that compounds mill-level deinking losses. Board mills absorb deinking yield losses into their base price per metric tonne of reel stock. Converters buying coated recycled board (CRB) or deinked folding boxboard (FBB) encounter further scrap during sheeting, printing, die-cutting, and gluing.

Determining true substrate costs requires combining mill yield factors with plant converting allowances.

Die-cutting matrix waste is the largest source of shrinkage in converting. Carton geometry, nesting, and gripper margins set the sheet utilization rate. Typical carton layouts generate matrix scrap between 6% and 14% of gross web width.

When web trim, skeleton scrap, and make-ready sheets are included, total plant waste reaches 10-18%. Sizing board orders purely on finished box weight leads to short material orders and flawed unit pricing.

  • Matrix Scrap Losses ~ Inter-carton bridges and perimeter web trim generated during die-cutting consume usable board area.
  • Make-Ready Consumption ~ Pass adjustments, color matching, and die calibration burn through physical sheets before run approval.
  • Edge Trim Defect Purges ~ Slitting master reels down for folder-gluers produces continuous side-trim scrap.
  • Moisture Desiccation Loss ~ Ambient air in multi-pass converting pulls moisture from the sheet, dropping finished weight.

Calculating total shrinkage from raw wastepaper to finished carton uses a cumulative yield calculation. If a deinking mill achieves an 84% dry mass yield (0.84 conversion factor) and the converter reaches 90% sheet utilization (0.90 conversion factor), overall system yield is 0.756, or 75.6%. Producing 1.00 metric tonne of finished folding cartons requires 1.32 metric tonnes of recovered paper bales.

Failing to compound mill deinking shrinkage with converter matrix scrap creates an immediate landed cost deficit on high-volume folding carton quotes.

Landed substrate pricing has to reflect this compound shrinkage. If deinked board costs 900 USD per metric tonne at the mill gate and converting waste is 12%, effective material cost per metric tonne of finished product rises to 1,022.73 USD before freight. Leaving out waste allowances during estimation erodes gross margins, turning tight consumer goods quotes unprofitable.

Calculating unit pricing without compound shrinkage shifts unaccounted substrate costs directly onto operating margins.

Safety

Layered kraft paper board samples are mounted on a geometric display board inside an industrial converting testing laboratory.

Residual Deinking Contaminants and Food Contact Compliance

Flotation deinking serves two roles in recycled board production: removing visible ink to boost brightness and purging chemical contaminants to meet food contact standards. Post-consumer papers carry mineral oil hydrocarbons from offset inks, categorized into mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH). Flotation efficiency directly determines how much mineral oil remains bound to recycled fibers.

Flotation alone cannot remove all low-molecular-weight mineral oil fractions. Standard cells clear 60% to 80% of petroleum hydrocarbons, leaving heavy fractions and low-volatility aromatics absorbed inside the fiber matrix. When unbarriered board containing MOSH or MOAH packages dry food, mineral oil vapors migrate into the product.

Frameworks like European Regulation EC 1935/2004 and national guidelines like German BfR Recommendation XXXVI/3 mandate that board makers and converters prove compliance with migration limits.

Migration Testing Conditions for Recycled Board Food Contact Verification
Test Method / Standard Food Simulant Used Test Conditioning Target Analytes Compliance Threshold
EN 14338 (Vapor Phase) Modified Polyphenylene Oxide (Tenax) 10 days at 40°C MOSH (C16-C35) / MOAH (C16-C35) MOSH < 2.0 mg/kg; MOAH < 0.5 mg/kg
EN 645 (Cold Water Extract) Distilled Water Extract 24 hours at 23°C Formaldehyde, Heavy Metals Formaldehyde < 15 mg/kg extract
EN 647 (Hot Water Extract) Distilled Water Extract 2 hours at 80°C Water-Soluble Polycyclic Aromatics Specific Migration Limits (SML)

When flotation deinking fails to drive MOSH/MOAH levels below analytical limits, converters rely on functional barriers. Co-extruded liners, EVOH film laminates, or aqueous dispersion coatings on the unprinted reverse side block vapor-phase migration. If high residual ink levels remain in the furnish, the barrier must withstand converting operations like folding, creasing, and scoring without micro-cracking and opening migration paths into the food.

Verifying barrier performance requires migration testing with food simulants like Tenax under set temperature and time controls. The European Packaging and Packaging Waste Regulation (PPWR) sets strict limits on heavy metals, capping combined lead, cadmium, mercury, and hexavalent chromium at 100 mg/kg of total package mass. While flotation removes heavy metal pigments common in older inks, raw material variation makes ongoing batch testing essential to prevent customs holds.

What analytical threshold determines whether intensified flotation deinking eliminates the need for an internal barrier coating in direct dry food contact packaging?

Nomenclature

MOSH MOAH Migration

Hydrocarbon Transfer ~ Movement of mineral oil saturated hydrocarbons and mineral oil aromatic hydrocarbons from packaging into food happens through direct contact or gas phase evaporation.

INGEDE Method 11

Deinkability Assessment ~ Laboratory test protocols developed by the International Association of the Deinking Industry evaluate the removability of printed inks and varnish coatings from paper and board products during alkaline repulping.

EN 647

Leaching Procedure ~ Chemical assessment of paper and board materials intended for elevated temperature food contact uses hot aqueous extraction to evaluate soluble constituents.

Mineral Oil Hydrocarbons

Migration Control ~ Hydrocarbons sourced from crude oil and synthetic processing represent a persistent contamination risk in food packaging supply chains.

PTS-RH 021/97

Fiber Porosity ~ High pressure liquid permeability testing quantifies the resistance of paper structures to gas or fluid movement during vacuum processes.

FSC-STD-40-004

Chain Custody ~ This regulatory framework dictates the mandatory administrative protocols that organizations must maintain to verify the trackable origin of wood fibre through every phase of processing, conversion, and trade.

Fiber Yield

Production Metric ~ Mechanical pulping efficiency represents the conversion ratio of dry wood mass into usable chemical or mechanical pulp ready for papermaking.

BfR Recommendation XXXVI 3

Compliance Standard ~ European safety requirements for food-contact paperboards establish specific limits on chemical migration during high-temperature preparation.

Conversion Factors

Quantitative Ratio ~ Mathematical multipliers establish standard equivalence between differing measurement units used in international paper trade and material accounting.

EN 645

Extraction Protocol ~ European standard en 645 provides a set of procedural requirements for the preparation of cold water extracts from paper and board materials intended for food contact applications.

Food Contact

Interface Protocol ~ Material safety standards govern every substance that comes into direct or indirect proximity with consumables.

EC 1935/2004

Regulatory Mandate ~ Food safety compliance rests upon the framework defined by ec 1935/2004.

What the firm knows, published

Expertise is a utility, not a secret. sentiention™ publishes its working knowledge as open reference: intelligence layer covering the materials it sources, the markets it enters, and the reference that serves both.