Internal Stress
Frozen structural stresses trapped inside paper sheets develop when web shrinkage is mechanically restrained during paper machine drying sections. Unrelieved tension creates dried-in strains that remain stable until moisture exposure or heating releases the locked fiber network. Wet presses and cylinder dryers pull paper webs under high draw tensions to maintain sheet width and prevent web breaks.
Drying Mechanism
Evaporative drying forces web shrinkage while machine draws physically prevent dimensional contraction along the running direction. As moisture leaves the web, individual fibers contract laterally, creating internal tensile stress across hydrogen-bonded intersections. Machine direction draws prevent natural axial relaxation, freezing high internal stress into dry cellulose structures.
The presence of dried-in strains increases web tensile stiffness while decreasing ultimate stretch capacity before rupture. Non-uniform moisture removal across web width creates localized strain variations that trigger sheet curl during converting. Dryer section pocket ventilation controls evaporation uniformity to minimize regional stress gradients.
Dimensional Instability
Environmental humidity changes relax frozen polymer structures and release stored mechanical stress within paperboard sheets. Water molecules act as plasticizers in cellulose, allowing fiber networks containing dried-in strains to release tension through permanent dimensional distortion. Hygroexpansivity and cockling increase directly with higher levels of restrained drying stress.