Mechanical Indentation
Continuous web impression systems deform paperboard along predefined lines using matched male and female cylinders to form controlled folding hinges. This mechanical converting operation, termed rotary creasing, depresses the inner liners and delaminates internal fibrous structures without breaking the tensioned outer surface plies. In high-speed corrugated container production and continuous folding carton converting, the process provides the rapid hinge placement needed for downstream folding and packing equipment.
Mechanical effectiveness depends on cylinder diameter, machine web tension, rule geometry, and the depth of the female counter-channel cut into the anvil cylinder. The technique stops applying where reciprocating flatbed platen die cutters are selected for short runs or complex carton geometries.
Fiber Delamination
Hinge formation requires controlled internal shear failure, delaminating internal board plies along the score profile. The male creasing rule presses down, stretching outer surface fibers while buckling and compacting internal and inner plies inward. When properly calibrated, this internal separation reduces the bending moment of the board, allowing clean ninety-degree and one-hundred-and-eighty-degree folds under minimal turning force.
Inadequate rule depression prevents internal delamination, leaving high bending resistance that warps carton panels on automated case erectors. Over-creasing fractures the outer tension liner, destroying carton aesthetics, leaking containment, and reducing stacking strength across vertical box corners.
Rotary Geometry
Curved cylinder geometry presents challenges absent in flatbed scoring setups, because circular roll surfaces create variable entry and exit shear angles during creasing. Male rules roll into the counter-channel with a heel-and-toe motion, introducing forward and backward shear stresses alongside standard vertical compression. Tool makers compensate for this motion by modifying rule bevels and running specialized polyurethane anvils that yield under dynamic contact.
Proper cylinder clearance calibration matches the compressed board caliper, preventing unwanted score skew or sheet stretching under high web velocities. Stable web alignment and constant cylinder tension maintain accurate crease placement across long conversion runs.