
Creasing Matrix Sizing Baseline for Virgin Folding Boxboard
Base matrix channel width for virgin folding boxboard on rule thickness plus 1.45 times caliper, setting channel depth equal to measured sheet thickness.

Base matrix channel width for virgin folding boxboard on rule thickness plus 1.45 times caliper, setting channel depth equal to measured sheet thickness.

Calculate creasing matrix channel width using the formula W = T + (F Ă— C), selecting factor F between 1.4 and 1.7 based on board grade and fiber stiffness.

Predictive mechanical creasing models calculate rule penetration and matrix pairing to induce controlled delamination while preventing surface liner fracture.

Heavyweight folding boxboard requires matrix depth matching board caliper and channel width calculated at one point seven times caliper plus rule thickness.

Calculate crease matrix width by multiplying uncoated cartonboard caliper by 1.5 and adding rule thickness, setting channel depth equal to board caliper.
Expertise is a utility, not a secret. sentiention™ publishes its working knowledge as open reference: intelligence layer covering the materials it sources, the markets it enters, and the reference that serves both.