Material Depletion
Wet-end operations and fiber preparation stages always result in some degree of material being lost from the production stream. Within this context, yield loss refers to the percentage of raw fiber, filler, and chemical additives that are discharged from the process as waste or sludge rather than being retained in the finished paper sheet. This loss represents a substantial financial and environmental challenge for modern paper mills.
Process Mechanisms
These losses occur during cleaning, screening, and de-inking, where heavy contaminants and fine fibers are removed from the stock. Some fiber is also lost during sheet breaks and trim removal, although much of this is recycled within the mill as broke. Fine fibers can pass through the forming wire and escape with the white water, ending up in the wastewater treatment plant if the recovery systems fail.
A high loss rate indicates that the cleaning equipment is poorly tuned or that the pulp contains a large amount of short, damaged fibers.
Industrial Impact
Reducing these losses improves the cost efficiency of the mill and lowers the volume of waste that must be disposed of. Papermakers use retention aids and save-all systems to capture and recycle these fine materials.