Surface Sizing
Liquid absorption testing measures the mass of water absorbed by a unit area of paper or board within sixty seconds. Laboratory operators evaluate Cobb60 water absorption to verify internal sizing levels and surface water resistance on sizing-treated substrates. The test standard governs sizing evaluations on sized paper, folding boxboard and corrugated linerboard grades.
The scope stops applying to non-porous plastic films or metallic foils.
Standard Testing
Standard test protocol requires pouring one hundred millilitres of distilled water onto a defined sheet area held within a rigid metal ring. A metal roller passes over the test specimen between sheets of standard absorbent blotting paper to remove excess surface water after sixty seconds of contact time. The difference in specimen mass before and after liquid exposure yields the absorbed mass value in grams per square metre.
Incorrect roller pressure or improper blotting timing distorts liquid absorption values and invalidates comparative quality checks. Evaluating Cobb60 water absorption allows packaging converters to predict substrate behavior when exposed to high humidity or wet filling environments.
Barrier Performance
Moisture penetration reduces structural stiffness and compromises carton stacking strength in cold storage environments. Outer linerboard surfaces require low absorption values to maintain structural integrity and prevent water-based ink bleeding during flexographic printing. Corrugated box performance degrades rapidly when water absorption values exceed contract limits.