Standard Methodology
Standardized testing protocols in the pulp and paper industry establish consistent procedures for measuring the physical and mechanical properties of paperboard. TAPPI T 569 defines the specific method for determining the internal bond strength of paperboard using a dynamic pendulum impact. This standard ensures that tests performed in different laboratories or paper mills produce comparable results, which is essential for quality control.
It governs the sample preparation, the dimensions of the test specimens, and the calibration of the pendulum tester.
Test Execution
Mechanical forces are applied to the specimen by a falling pendulum that strikes a metal angle piece adhered to the paperboard. TAPPI T 569 requires the use of double-sided tape with specific adhesive properties to mount the paperboard sample between the base plate and the metal angle. The energy absorbed during the split is calculated from the height of the pendulum’s follow-through swing.
This measurement provides a direct evaluation of the inter-ply bonding strength of the board.
Substrate Evaluation
Converters rely on this standardized test to verify that the board can withstand the high tack of printing inks without delaminating. Variations in test results can indicate process instability in the paper mill. Proper testing ensures the board is fit for purpose.